- DAGL 110 ASt
- DAGL 110 Beschreibung
- DAW 100 Beschreibung
- DAW 100 ASt
- 120 EPA Beschreibung
- 120 EPA Ast
- Allrounder Beschreibung
- Allrounder Ast
- 140 VKS Beschreibung
- 140 VKS Ast
- 600 KBA Beschreib
- 600 KBA Ast
- 136 FBA Beschreib
- 136 FBA Ast
- 330 RBA Beschreibung
- 330 RBA Ast
- 165 Abstapler Beschreibung
- 165 AS ASt
- 119 VSA Beschreibung
- 119 VSA ASt
- 112 GVH Beschreibung
- 112 GVH Ast
- 200 Zuschn+Bearb. Beschreibung
- 200 Zuschn.+Bearb. ASt
- 115_GVA_FÜ_W Beschreibung
- 115_GVA_FÜ_W ASt
- 115 GVA_FF_S Beschreibung
- 115 GVA_FF_S ASt
- 180 ZS Beschreibung
- 180 ZS ASt
- 300 ZFW Beschreibung
- 300 ZFW ASt
- 165 Abstapler Prospekt
- DAGL 110 Prospekt
- DAW 100 Prospekt
- 120 EPA Prospekt
- 140 VKS Prospekt
- 136 FBA Prospekt
- 330 RBA Prospekt
- 119 VSA Prospekt
- 112 GVH Prospekt
- 200 Zus+Bearb. Prospekt
- 115 GVA FF Prospekt
- 115 GVA FÜ Prospekt
- 180 ZS Prospekt
- 300 ZFW Prospekt
- 136 FBS-BT Beschreibung
- 136 FBS-BT ASt
- 136 FBS-BT Prospekt
- 135 FBM-K Beschreibung
- 135 FBM-K ASt
- 135 FBM-K Prospekt
- 135 FBM-H Beschreibung
- 135 FBM-H ASt
- 135 FBM 135-H Prospekt
- Holzfenster
- 165 ASG-S Beschreibung
- 165 ASG-S ASt
- 165 ASG-S Prospekt
- 600 KBA Prospekt
The self-driven overlap profile saw is an ideal supplement to highly automated assembly lines for PVC windows.
This appliance guarantees the highest cutting precision at a length of up to 2.50 metres, within a margin of 0.2 to 0.3 mm.
These optimal cutting results are achieved using specially developed mounting technology, where the sash is pressed from the inside against the saw edge.
Profile margins, as well as technologically caused distortions to the welded sash, can be regulated effortlessly.
The on and off-loading of the sash occurs automatically. Axes are used for positioning moves and loading.
Optionally, a sash pivot can be used to swivel the components round to the sawing position.
Nozzles for suctioning away shavings during operation are also integrated. Following the saw cutting, the surplus piece will fall out of the operating range of the machine.
The data for the component processing at the overlap profile saw can be obtained at either the downstream or upstream machine, such as for example the automatic gasket insert machine or frame fittings mounting centre.
A barcode reader may be installed in order to identify components.
Settings may be adjusted to allow frames and standard units to be fed through without being processed.
